| Beispiel |
DP |
P |
- |
12864 |
G |
3 |
7 |
7 |
1 |
3 |
- |
B |
F |
H |
| Position |
1 |
2 |
3 |
4 |
5 |
6 |
7 |
8 |
9 |
10 |
11 |
12 |
13 |
14 |
|
Beschreibung:
| Nr. |
Beschreibung |
Erklärung |
| 1 |
Hersteller |
demmel products |
| 2 |
Produkt |
| P = iLCD Panel |
B = iLCD Controller Board |
|
| 3 |
Separator |
|
| 4 |
Format |
12232 = 132 x 64 dots
12864 = 128 x 64 dots
2412 = 240 x 128 dots
T2412 = 240 x 128 dots /w touch screen |
3224 = 320 x 240 dots (5.7")
T3224 = 320 x 240 dots (5.7") /w touch
P3224 = 320 x 240 dots (3.5"/PDA-size)
TP3224 = 320 x 240 dots (3.5") /w touch |
|
| 5 |
Display Type |
| B = Chip on board /w pin headers |
G = Chip on glass /w FCC connector
Z = Chip on board /w FCC connector |
|
| 6 |
iLCD Controller |
1 = DPC1010
3 = DPC1030 |
5 = DPC1050
6 = DPC2060 |
|
| 7 |
Control ports 1) |
0 = 5 Volt serial + I2C
1 = RS-232 port |
2 = USB port
4 = RS-422/RS-485 port |
|
| 8 |
I/O Ports 1) |
0 = No I/O ports
1 = General purpose I/O |
2 = ATX power outputs
4 = Relay outputs |
|
| 9 |
Options 1) |
0 = No options
1 = Keyboard inputs |
2 = Micro power reference 2.5 Volt
4 = Micro power reference 4.0 Volt |
|
| 10 |
Power Supply 1) |
0 = Jumper only
1 = Floppy disk power supply |
2 = Built in regulator |
|
| 11 |
Separator 2) |
|
| 12 |
LCD Hersteller 2) |
| G = GiantPlus |
B = Bolymin |
|
| 13 |
LCD Farbe 2) |
G = STN/gray
Y = STN/yellow green |
B = STN/blue
F = FSTN |
|
| 14 |
Backlight Type/Farbe 2) |
L = LED array/yellow green
H = LED edge/white
R = LED array/red
G = LED edge/yellow-green |
D = LED edge/blue
E = EL/white
B = EL/blue
C = CCFL/white |
|
|
Anmerkung:
1) The resultierende Zahl errechnet sich durch Addieren der Nummen der Optionen.
2) Diese Positionen entfallen bei der Nummerierung eines iLCD Controller Boards.
|
Zum Seitenbeginn
Fenster schließen