RS-232 cable, DB-9 (female) to 10-pin mini-latch connector with polarizing key, length 1.8 m.
Suitable for all iLCD panels and controller boards to connect the serial port to e.g. a PC.
DPA-CRS232F
RS-232 flat cable, DB-9 (female) to 10-pin mini-latch connector with polarizing key, length 0.5 m.
Suitable for all iLCD panels and controller boards to connect the serial port to e.g. a PC.
DPA-CUSB10
USB cable, type A (male) connector to 5-pin mini-latch connector with polarizing key, length 1.0 m.
Suitable for all iLCD panels and controller boards with USB port to connect to the PC's USB port. Allows power supply of the iLCD panel via the USB port.
DPA-CPWR
Power supply cable, floppy disk power supply connector on the one end, no connector on the other end, 3 wires (Ground, +5 Volt, +6...12 Volt), lenght 50 cm.
Suitable for all iLCD panels and controller boards.
DPA-CL10P15
LCD Connector cable for connecting a custom LCD to one of the iLCD controller boards. 10-pin mini-latch connector on the one side, stripped and tinned open end on the other side, lenght 15 cm.
Note that two 10-pin cables are required to connect a LCD.
Power Supplies
Order Number
Description
DPA-A6VUE
220 VAC power supply plug-in adaptor for European wall outlet, 6 Volt/400 mA unstabilized, floppy disk power supply connector.
For connecting to iLCD panels and controller boards with built in 5 Volt regulator.
DPA-A5VSE
100 - 240 VAC power supply plug-in adaptor for European wall outlet, 5 Volt/1200 mA stabilized, floppy disk power supply connector.
For connecting to iLCD panels and controller boards even without built in regulator.
FFC/FPC Interface P.C.B.
Order Number
Description
DPA-PCBFFC1.0-30
Interface PCB for connecting a LCD with FFC/FPC cable (up to 30 pins) via DPA-CL10P15 cables.
No FFC/FPC connector mounted.
DPA-FFCI-20
Interface PCB for connecting an iLCD panel (e.g. the color iLCD panels) via an 20-pin FFC/FPC connector.
FFC/FPC connector and FFC cable with 130 mm length included.
Top of page