Color iLCD Panel with 1024x600 Pixels with 10.2 "

The worldwide unique DPP-CT1060 iLCD panel enables you to place all required information on 614.4000 pixel via your even smallest micro-montroller.

The iLCD panel with the new iLCD controller DPC3080 has 32 MByte flash memory on board and offers enough space for big images. Text templates, fonts and macros can be stored in this memory as well. 8 MByte RAM for multiple screen handling complete the well equipped panel.

A microSD card holder is on board enabling you to further expand your memory for images and use specific use. It can operate in portrait-mode as well.

The DPP-CT1060 iLCD panel is is well prepared for future demands: the possibility to connect via TCP/IP interface is available by default. This features can be activated easily by doing a simple firmware-update at some future time.

The brightness of the TFT diplay is 300 cd/m² and it is equipped with LED backlight. It allows you to show your graphics either with full 16-bit color depth or with 8-bit (with 16-bit color palette created by the setup software automatically) color depth. As seen on all other iLCD panels, animated images (color GIF-images) can be displayed easily within minutes.

An evaluation kit with extra PCB with FFC connectors and flat-cables plus all other required cables including a power-supply and software on CD is available.

The hardware equipment of the iLCD panel DPP-CT1060 (with touchscreen) and the
DPP-C1060 (without touchscreen) is as follows:

Single 5 volt (optional 3V3) power supply USB port RS-232 port with 3.3 volts I2C port and SPI port 32 MByte flash-memory for user-data Controls up to 16 digital outputs Controls up to 16 digital inputs 4 analog inputs with 10-bit resolution

Resources     DPP-CT1060 Specification   iLCD Command Set   Setup Software

• Controls 2 relays or speaker/buzzer, PWM output
• Controls a keyboard-matrix with up to 128 keys

• 8 MByte RAM for screen save/restore
• Real-time clock with battery backup
• MicroSD card holder on board