Color iLCD Panel with 480x272 Pixels with 4.3"

The brandnew DPP-CT4827 iLCD panel with the new iLCD controller DPC3080 has 32 MByte flash memory on board and offers enough space for images, text, fonts and macros. 8 MByte RAM for multiple screen handling complete the well equipped panel.

A microSD card holder is on board enabling you to further expand your memory for images and use specific use. It can operate in portrait-mode as well.

The DPP-CT4827 iLCD panel is is well prepared for future demands: the possibility to connect via TCP/IP interface is available by default. This features can be activated easily by doing a simple firmware-update at some future time.

The brightness of the TFT diplay is 250 cd/m² and it is equipped with LED backlight. It allows you to show your graphics either with full 16-bit color depth or with 8-bit (with 16-bit color palette created by the setup software automatically) color depth. As seen on all other iLCD panels, animated images (color GIF-images) can be displayed easily within minutes.

An evaluation kit with extra PCB with FFC connectors and flat-cables plus all other required cables including a power-supply and software on CD is available.

The hardware equipment of the iLCD panel DPP-CT4827 (with touchscreen) and the
DPP-C4827 (without touchscreen) is as follows:

Single 5 volt (optional 3V3) power supply USB port RS-232 port with 3.3 volts I2C port and SPI port 32 MByte flash-memory for user-data Controls up to 16 digital outputs Controls up to 16 digital inputs 4 analog inputs with 10-bit resolution

Resources     DPP-CT4827 Specification   iLCD Command Set   Setup Software

• Controls 2 relays or speaker/buzzer, PWM output
• Controls a keyboard-matrix with up to 128 keys

• 8 MByte RAM for screen save/restore
• Real-time clock with battery backup
• MicroSD card holder on board