Display Control with iLCD

The comfortable and easy to learn command set enables you to fully control nearly any available graphic LCD with a size from 122x32 up to 320x240 pixels. All static and animated graphics, fonts and text templates are stored in the iLCD Controller's flash memory, via the free iLCD setup software, prior to its use by your controlling hardware.

More than 100 commands allow you to carry out any task quickly and easily:

• Text: Select any fixed or proportional font; choose bold, underline or inverse attribute, control paragraphs with word-wrap, vertical and/or horizontal alignment, full ANSI support; output text templates that are stored in the iLCD Controller's flash memory.
• Graphics: Draw lines and rectangles, even with dotted or chain dotted lines, draw circles and frames with rounded corners and shadows, fill or erase areas, use low-level functions like setting/clearing pixels.
• Images: Paint any graphic stored in the iLCD Controller to any position, control up to 8 animated graphics per screen without sending any bytes after starting.
• Screenshots: Store complete LCD screens to the RAM of the iLCD Controller, modify these stored images, output stored images to any position.
• Touch Screen Support: You may define up to 64 touch fields with any layout and behavior. Pressing/releasing a touch field will be reported to the application.

The complete iLCD command set can be found here:

 iLCD Command Set