128x64 Pixel iLCD COB Panel

The DPP-12864B37713-BFH iLCD Panel is our universal model with an excellent chip on board FSTN LCD with white LED backlight. See more information about the differences between chip on glass and chip on board here.

This iLCD Panel shows the most extensive hardware equipment of all models. The LC display can be unplugged to connect a different LCD - even with a different LCD controller - to the board header. Please note that the negative voltage supplied by this panel is between -2.7 and -4.0 volts and the LED backlight is driven via a 27 ohm resistor to 5 volts. If these values do not fit the requirements of your custom LCD, please use our Universal Controller Boards instead. These boards allow for directly plugging in the LCD as well, but they have an adjustable DC/DC converter for the negative LCD voltage and an adjustable current source for the LED backlight on board, as well.

The hardware equipment of the iLCD Panels DPP-12864B37713-BFH is as follows:

USB port RS-232 port RS-232 port with 5 volts Alternative to the above: RS-422/485 port I2C port Controls up to 6 LEDs Controls 2 relays or speaker/buzzer, PWM output Connects up to 32 keys Up to 4 digital or analog inputs Controls an ATX power supply Power supply can be done via 6...12 V as well

Resources     DPP-12864 Module Specification   iLCD Command Set   Setup Software

Above all, the iLCD Controller's typical features are available.