128x64 Pixel DIP Module

Our DIP Module DPP-D12864G32010-BFH has a size of only 73x48 mm exactly covering the area of the COG display only. The PCB is mounted on the backside and contains 2.54 mm headers suited for direct plug-in or soldering into your board. The height is 8 mm only.

The connections to the outside world are made via your own PCB, the functionality is the same as on our standard iLCD panel on principle. To learn about details please have a look to our specification document.

An evaluation kit with extra PCB with sockets for the DIP module plus all other required cables including a power-supply and software on CD is available.

The DIP module is delivered in FSTN technology with white backlight or negative blue STN technology (silver characters on blue background).

The hardware equipment of this module is as follows:

USB Port 2 x RS-232 port wih 5 volts I2C Port Controls up to 6 LEDs Controls 2 relays or speaker/buzzer, PWM output Connects up to 32 keys Up to 4 digital or analog inputs

Ressources     DPP-D12864 Module Specification   iLCD Command Set   Setup Software

Above all, the iLCD Controller typical features are available.