Calibrate Touch Screen and Report

\i T c

Starts the touch screen calibration for a resistive touch screen (see also Calibrate Touch Screen) and also sends an asynchronous report (refer to Calibrate Touch Screen Done) if the calibration was successful.

Note

• This command returns a [NACK] for a capacitive touch screen.
• If the second calibration point is too close to the first one, the report is sent with a [NACK].

Response Example

[ACK]

The on-screen touch calibration was started.

See also:

Calibrate Touch Screen
Calibrate Touch Screen Done

Copyright © demmel products gmbh. All rights reserved.