Delay Macro Execution

\i O D word::delay

Parameter	Type	Range	Description
delay	word	0 ... 65535	delay for macro execution in units of 10ms

Waits for the specified amount of time (delay times 10ms) until the currently executed macro will be continued.

Note

The only way to terminate such a delay is to send any command (such as the No Operation command) to the iLCD Controller. This is the reason why delays are ignored in normal command mode and why entering the command does not have any effect when not called via a macro.

Response:

[ACK]

Example

\iOD\D3000

Waits for 30 seconds until the operation of the current macro is continued.