Reset All

Clears entire screen area and sets default values for all attributes:

Cursor is set to 0, 0
The screen orientation is set to the default value set by iLCD Manager XE.
All touch fields are removed, report touch field coordinates and movements is disabled
Text alignment is reset
Bold, inverse and underline attributes are set to off
Color values are set to default
Font is set to startup font
Underline position is set to 0
All animations are stopped
Animation engine is started
LCD contrast is set to the corresponding EEPROM value
LCD Gamma value is set to the corresponding EEPROM value
Backlight intensity is set to the corresponding EEPROM value
The backlight state is set to the corresponding EEPROM value
Watchdog is disabled
Smart power-off is switched off
Power-off notification set to default
Power/Watchdog related pins are released
Shutdown is cancelled
ANSI mode is set to default
Horizontal and vertical wrapping mode is set to default
Auto-Linefeed is set to default
TAB spacing is set to default
Backlight blink frequency is set to default
XON/XOFF mode is set to default
Keyboard is enabled/disabled according to default value
Keyboard reporting is turned on/off according to default value
Relay outputs are set to default
Output blink frequencies are set to default
All outputs are reset to their startup states
All open files on the MicroSD card are closed
The main screen is selected as draw and view screen
All viewports are removed
All scale factors are set to 1
All line attributes are set to default
The Macro Timer is set 0

Only if the "Extras on Reset" option on the "Settings" page of iLCD Manager XE is set to "Clear" (this setting is ignored in firmware versions < 3.02):

All offsets are set to 0
All prefixes and suffixes are set to empty strings

Response:

[ACK]

Reset All and Show Startup Graphic