Select Viewport

\i C V S byte::viewport

Parameter	Type	Range	Description
viewport	byte	0 ... 8	index of the viewport

Selects a specified viewport via its index viewport.

A viewport of 0 represents the main viewport (the entire screen).
Any other custom viewport can only be selected if it was previously defined with the Define Viewport command.
After selecting a viewport, the cursor position and all attributes (see LCD Attribute Commands) are restored to the state when this viewport was lastly active.
If viewport is other than 0 (main viewport for the active draw screen), the screen the viewport was defined on is activated as the draw screen.

Response:

[ACK]

Example

\iCVS\1

This example selects the viewport defined with index 1.

Not supported by: DPC3020, DPC2060, DPC10xx