Set/Clear Pixel at X/Y

\i D p word::pos_x word::pos_y bool::on_off

Parameter	Type	Range	Description
pos_x	word	0 ... display width - 1	horizontal position
pos_y	word	0 ... display height - 1	vertical position
on_off	bool	0 ... 1	determines whether a pixel is set (1) or cleared (0)

Sets or clears a pixel at the specified position.

• The cursor position will be updated after this command.
• Setting/clearing a pixel is done with the current foreground/background color. When inverse mode is on, setting/clearing a pixel will be done in the opposite way.
• If an alpha value other than 255 was set before (see Set Alpha), the pixel is drawn with the according opacity.

Response:

[ACK]

Example

\iDp\D120\D55\1

Sets or clears a pixel at the position x = 120 and y = 55 pixels.

Set Background Color
Set Foreground Color
Set Inverse Mode
Set Alpha