Method comm.I2C.open

Package comm
Class I2C

void open(int freq, int address)

Throws:

_INSERT_METHOD_SIGNATURE_HERE_

Description:

Parameter	Range	Description
addr	0 ... 127	iLCD controllerJoC address
freq	0 ... 400000	I2C bus frequency in Hz

Opens the I2C interface. This method can be used to set the frequency and the address of the iLCD-controllerJoC board.

Notes

I2C has to be enabled in the iLCD project. To do this select the corresponding checkbox in the iLCD Manager XE on the Settings Tab under Hardware Settings.