Set Graphic Offset

\i X O G word::offset

Parameter	Type	Range	Description
offset	word	0 ... max. graphic index - 1	offset of the graphic index

Sets an offset for the graphic index (see Display Local Graphic).

This functionality can be used to support multiple languages without conditional commands or macros. For example, if the graphics for the English language are indexed 0 to 9 and for the German language 10 to 19, setting the Graphic Offset to 10 will automatically draw the German graphics instead of the corresponding English ones.
When addressing graphics by name, a prefix or suffix can be used to realize language switching. (see Set Graphic Name Prefix or Set Graphic Name Suffix).
The default value for offset is 0. It will be automatically set to default on startup and by the commands Reset All or Reboot Panel Controller if the "Extras on Reset" option on the "Settings" page of iLCD Manager XE is set to "Clear". Selecting "Keep" allows for using the reset commands without loosing e.g. the selected language. This setting is ignored in firmware versions < 3.02.

Response:

[ACK]

Example

\iXOG\D10
\iG\D1

Sets the graphic offset to 10. The subsequently called command to draw the graphic with index 1 will now use the graphic with index 11 instead.

Not supported by: DPC3020, DPC2060, DPC10xx