Set Power-Off Notification On/Off
\i P N bool::on_off
| Parameter |
Type |
Range |
Description |
| on_off |
bool |
0 ... 1 |
determines whether power-off notifications appear (1) or not (0) |
Enables or disables power switch notification.
Note
- When the power switch is pressed, the sequence "* [ACK]" is sent to the PC when the notification is on (on_off = 1). When the notification is off (on_off = 0) the PC has to poll the status by the Get Power State command.
- Even when the notification is off, the shutdown sequence is sent when smart power-off is on (see Set Smart Power-Off Mode).
- The PC's power switch has to pull low the input pin with function APSWI assigned to.
- The default value for on_off is 1, but can be modified on the "Settings" page of iLCD Manager XE. It will be automatically set to default on startup and by the commands Reset All or Reboot Panel Controller.
Example
\iPN\0
This example deactivates power-off notifications.
See also:
Power/Watchdog Related Commands
Get Power State
Copyright © demmel products gmbh. All rights reserved.