Enable/Disable ANSI

\i C A bool::on_off

Parameter	Type	Range	Description
on_off	bool	0 ... 1	ANSI on (1) or off (0)

Enables or disables ANSI mode.

When ANSI support is disabled (on_off = 0), ANSI sequences like carriage returns or escape sequences will not have any effect (see ANSI Support).
The default value for on_off is 1, but can be modified on the "Settings" page of iLCD Manager XE. It will be automatically set to default on startup and by the commands Reset All or Reboot Panel Controller.

Response:

[ACK]

Example

\iCA\1

Enables the use of ANSI sequences.