Enable/Disable Automatic Touch Macro Executing

\i T E A bool::on_off

Parameter	Type	Range	Description
on_off	bool	0 ... 1	determines whether auto-executing is on (1) or off (0)

Enables or disables automatic execution of touch field's make or break macros.

Note

When automatic execution is disabled, assigned make or break macros (refer to Set Touch Field Make Macro and Set Touch Field Break Macro) are not executed when the touch field is pressed or released but the cursor position for touch fields with assigned macros will still be updated.
Make or break macros can still be assigned to touch fields while the controlling application is now able to receive touch reports (refer to Touch Field Press/Release). As a response to this event, the assigend macro must then be called by the application (refer to Execute Touch Make Macro and Execute Touch Break Macro).
This way, all advantages of the touch macro concept (refer to Touch Screen Related Commands) can be used while the touch report allows synchronization with the controlling application.
The default value for on_off is 1. It will be automatically set to default on startup and by the commands Reset All or Reboot Panel Controller.

Response:

[ACK]

Example

\iTEA\0

Disables automatic execution of touch macros.

Not supported by: DPC3020, DPC2060, DPC10xx