Enable/Disable Rotary Encoder Reporting

\i I E bool::on_off

Parameter	Type	Range	Description
on_off	bool	0 ... 1	determines whether rotary encoder events are reported (1) or not (0)

Enables or disables the reporting of rotary encoder events (refer to Rotary Encoder Turn).

The default value for on_off is 1. It will be automatically set to default on startup and by the commands Reset All or Reboot Panel Controller.

Response:

[ACK]

Example

\iIE\0

Disables the reporting of rotary encoder events.

Not supported by: DPC3020, DPC2060, DPC10xx