Enable/Disable Touch Field Reporting

\i T P bool::on_off

Parameter	Type	Range	Description
on_off	bool	0 ... 1	determines whether touch events are reported (1) or not (0)

Enables or disables the reporting of touch field make and break events.

Any assigned make or break macros will still be executed.
The default value for on_off is 1. It will be automatically set to default on startup and by the commands Reset All or Reboot Panel Controller.

Response:

[ACK]

Example

\iTP\0

Disables the reporting of touch field events.

Not supported by: DPC3020, DPC2060, DPC10xx