Set Adjustment for Graphics

\i A A G bits::mode

Parameter	Type	Range	Description
mode	bits	Bit 0 ... 4	flags for possible modifications

Sets the adjustments used for all graphics drawn subsequently. The value for any selected modification has to be set before the actual drawing command is sent. Only the modifications set in the mode bitmask will be carried out:

Bit	Description
0	brightness (see Set Brightness Adjustment)
1	contrast (see Set Contrast Adjustment)
2	hue (see Set Hue Adjustment)
3	saturation (see Set Saturation Adjustment)
4	invert

• All adjustment modifications can be combined and carried out simultaneously with this command. The modifications are processed in the following order: invert - hue/saturation - brightness/contrast.
• After setting graphic adjustment, tile filling will also be adjusted accordingly (refer to Set Filling Tile).
• To draw unadjusted graphics again, send this command with mode 0.

Response:

[ACK]

Example

\iAAG\x10

All future graphic drawing will have the color values inverted.

Not supported by: DPC3020, DPC2060, DPC10xx

Display Local Graphic
Display Graphic Area
Fill Display
Fill Display Area
Draw Rectangle
Draw Styled Circle