Set Brightness Adjustment

\i A A B word::value

Parameter	Type	Range	Description
value	signed word	-255 ... 255	value for brightness adjustment

Sets the value for brightness adjustment used by the commands Adjust Display and Adjust Display Area as well as graphic drawing commands when Set Adjustment for Graphics is used.

The default value is 0, meaning no modification. It will be automatically set to default on startup and by the commands Reset All or Reboot Panel Controller.

Response:

[ACK]

Example

\iAAB\D-50

Sets the value for brightness adjustments to -50.

Not supported by: DPC3020, DPC2060, DPC10xx