Set Backlight Intensity (High-Res)

\i C i byte::intensity

Parameter	Type	Range	Description
intensity	byte	0 ... 255	intensity of the backlight (max. intensity = 255)

Sets the backlight of the display in high-res steps from 0 to 255.

This command is similar to Set Backlight Intensity but provides a finer adjustment for the intensity (high-res).
The default value for intensity is retrieved from the EEPROM emulation at location 1 in the coarse range (adjustable by the Set Backlight Intensity command). It will be automatically set to default on startup and by the commands Reset All or Reboot Panel Controller.
When the EEPROM is erased, the default value is obtained from the Flash data set on the "Settings" page of iLCD Manager XE. See further information about EEPROM at EEPROM Related Commands.
Although an intensity of 0 can darken the display completely, to turn the display off the command Set Backlight Mode should be used!

Response:

[ACK]

Example

\iCi\125

Sets the backlight intensity to a moderate level.