Set Draw Screen

\i M D byte::screen

Parameter	Type	Range	Description
screen	byte	M, 0 ... number of screens - 1	index of the draw screen (M = main screen)

Selects the screen with index screen as the current draw screen.

Cursor position, active viewport and all attributes (see LCD Attribute Commands) are restored to the state when this draw screen was lastly active.
All subsequently issued drawing commands are sent to this screen until another one is activated. To show the results of these commands on the display, the according screen has to be activated as view screen.
The default value for screen is 'M' (main screen). It will be automatically set to default on startup and by the commands Reset All or Reboot Panel Controller.

Response:

[ACK]

Example

\iMD\0

Sets screen 0 as the current draw screen.

Not supported by: DPC3050, DPC3020, DPC2060, DPC10xx