Set Graphic Name Prefix

\i X P G string::prefix

Sets a prefix of case-sensitive string characters, which will be put in front of any subsequently sent graphic name (see Display Local Graphic).

• This functionality can be used to support multiple languages without conditional commands or macros. For example, if the graphic names for the English language are prefixed with "en_" and for the German language with "de_", the command

  \iG\mgraphic\0

  would display the graphic "en_graphic" or "de_graphic", dependent on the prior defined graphic prefix.
• When addressing graphics by index, an offset can be used to realize language switching (see Set Graphic Offset).
• Remove any previously set Graphic Name Prefix by entering an empty string as prefix:

  \iXPG\0
• The default value for prefix is an empty string. It will be automatically set to default on startup and by the commands Reset All or Reboot Panel Controller if the "Extras on Reset" option on the "Settings" page of iLCD Manager XE is set to "Clear". Selecting "Keep" allows for using the reset commands without loosing e.g. the selected language. This setting is ignored in firmware versions < 3.02.

Example

\iXPGen_\0

Not supported by: DPC3020, DPC2060, DPC10xx

Display Local Graphic
Load Animated Graphics
Set Message Offset
Set Graphic Name Suffix
Set Message Name Prefix
Set Macro Name Prefix
Set Font Name Prefix