Set Touch Field Height

\i T H word::height

Parameter	Type	Range	Description
height	word	0 ... display height	height of the touch field (0 = full height)

Sets up the height of any subsequently defined touch field (see Create/Define Touch Field) according to height.

• Sending this command does not change anything for touch fields already defined.
• If height is 0, the full height of the current viewport is used.
• After startup and after sending the Reset All command height is set to 20.

Response:

[ACK]

Example

\iTH\D25

Sets the height for the next touch field to be created to 25 pixels.

Touch Screen Related Commands
Set Touch Field Width
Create/Define Touch Field