Write Unicode Text

\i D U string::unicode_text

Parameter	Type	Range	Description
unicode_text	wstring	Unicode chars (0x0001 .. 0xFFFF)	unicode text to be output

Writes a unicode_text string to the current cursor position.

To terminate a string, a 2-byte NULL character (0x0000 resp. \0) has to be placed.
Characters not defined in the character table of a font are replaced with a space.
If the column address exceeds the right or bottom margin during printing, and the corresponding wrap mode is not set, the following characters are ignored.
Writing text will increase the row or column address and therefore change the cursor position.
To get the horizontal and vertical space occupied by the outputted text use the Get Unicode Text Extent command.
The text can contain any ANSI sequence (see ANSI Support) to e.g. control the cursor position (on a character or graphic based position) when the ANSI mode is on.

Response:

[ACK]

Example

\iDUHello World!\0

Writes "Hello World!" to the screen at the current cursor position and with the currently selected unicode font and attributes.

Not supported by: DPC3020, DPC2060, DPC10xx