Set Font

\i A F word::font_index

Parameter	Type	Range	Description
font_index	word	0 ... max. available font	index of the font

\i A F by_name::font_name

Parameter	Type	Range	Description
font_name	by_name	ASCII chars (0x01 .. 0xFF)	0-terminated font name

Sets a font for the subsequent text outputs.

The default value for font_index is 0, but can be modified on the "Fonts" page of iLCD Manager XE. It will be automatically set to default on startup and by the commands Reset All or Reboot Panel Controller.
The font with font_index of 0 is always available (even if the flash memory is blank).
When addressing by index, the font offset (see Set Font Offset) is taken into account.
When addressing by name, the font prefix (refer to Set Font Name Prefix) and suffix (refer to Set Font Name Suffix) are taken into account.
Setting a font also resets the underline position to 0 and sets the font spacing (see Set Font Spacing) and symbol font (see Set Symbol Font) mode to the way defined via iLCD Manager XE.
There is also a private ANSI extension which allows setting the font via an escape sequence (see Private ANSI Extensions).

Response:

[ACK]

Example

\iAF\D3

All subsequently outputted texts are drawn with the font with index 3.