Set Font Name Suffix

\i X S F string::suffix

Sets a suffix of case-sensitive string characters, which will be put after any subsequently sent font name (see Set Font).

• This functionality can be used to support multiple languages without conditional commands or macros. For example, if the font names for the English language are suffixed with "_en" and for the German language with "_de", the command

  \iAF\mfont\0

  would select the font "font_en" or "font_de", dependent on the prior defined font prefix.
• When addressing fonts by index, an offset can be used to realize language switching. (see Set Font Offset).
• Remove any previously set Font Name Suffix by entering an empty string as suffix:

  \iXSF\0
• The default value for suffix is an empty string. It will be automatically set to default on startup and by the commands Reset All or Reboot Panel Controller if the "Extras on Reset" option on the "Settings" page of iLCD Manager XE is set to "Clear". Selecting "Keep" allows for using the reset commands without loosing e.g. the selected language. This setting is ignored in firmware versions < 3.02.

Example

\iXSF_en\0

Set the font name suffix to "_en" and will subsequently only set fonts that end with these characters.

Not supported by: DPC3020, DPC2060, DPC10xx

Set Touch Field Text Message
Set Font
Get Text Message Extent
Write Text Message
Set Font Offset
Set Font Name Prefix
Set Message Name Suffix
Set Graphic Name Suffix
Set Macro Name Suffix