Set Touch Field Text Message

\i T T word::message_index

Parameter	Type	Range	Description
message_index	word	0 ... max. text message index	index of the text message

\i T T by_name::message_name

Parameter	Type	Range	Description
message_name	by_name	ASCII chars (0x01 .. 0xFF)	0-terminated message name

Assigns the text message defined by message_index or message_name to any subsequently defined touch field (see Create/Define Touch Field).

Sending this command does not change anything for touch fields already defined.
Setting message_index to 0xFFFF (decimal word â€“1) causes no text to be assigned to the subsequently defined touch field.
After startup and after sending the Reset All command message_index is set to -1.
Text messages assigned to touch fields are used by the Draw Touch Field Text Message command.
The text message can even contain any valid ANSI sequence so allowing various attributes/fonts to be changed easily.
At this time, the attributes message offset, prefix and suffix are ignored and the existence of the message index or name is not verified (see Set Message Offset, Set Message Name Prefix and Set Message Name Suffix). Offset resp. pre-/suffix is taken into account when the message is actually drawn (see Draw Touch Field Text Message).

Response:

[ACK]

Example

\iTT\D3

Assigns the text message with index 3 to any subsequently defined touch field.