Set Message Offset

\i X O T word::offset

Parameter	Type	Range	Description
offset	word	0 ... max. text message index - 1	offset of the message index

Sets a message index offset (see Write Text Message).

This functionality can be used to support multiple languages without conditional commands or macros. For example, if the messages for the English language are indexed 0 to 9 and for the German language 10 to 19, setting the Message Offset to 10 will automatically display the German messages instead of the corresponding English ones.
When addressing text messages by name, a prefix or suffix can be used to realize language switching. (see Set Message Name Prefix or Set Message Name Suffix).
The default value for offset is 0. It will be automatically set to default on startup and by the commands Reset All or Reboot Panel Controller if the "Extras on Reset" option on the "Settings" page of iLCD Manager XE is set to "Clear". Selecting "Keep" allows for using the reset commands without loosing e.g. the selected language. This setting is ignored in firmware versions < 3.02.

Response:

[ACK]

Example

\iXOT\D5
\iDt\D10

Sets the message offset to 5. The subsequently called command to write the message with index 10 will now put out the message with index 15 instead.

Not supported by: DPC3020, DPC2060, DPC10xx