Set Font Spacing

\i A S byte::x_spacing byte::y_spacing

Parameter	Type	Range	Description
x_spacing	byte	0 ... 15	horizontal spacing (number of blank pixels between consecutive characters)
y_spacing	byte	0 ... 15	vertical spacing (number of blank pixels between consecutive lines)

This command allows to overwrite the default font spacing defined via iLCD Manager XE for the currently selected font.

The default value for x_spacing and y_spacing is defined for every font on the "Fonts" page of iLCD Manager XE. They will be automatically set to default on startup and by the commands Reset All or Reboot Panel Controller.
The default font spacing is automatically scaled by font scale factor (refer to Set Fonts Scaling). When setting the spacing via this command, the coordinate scale factors are taken into account (refer to Set Row Coordinates Scaling for x_spacing and Set Column Coordinates Scaling for y_spacing).
If the current font is set to symbol mode (see Set Symbol Font) the setting of x_spacing and y_spacing is ignored and no blank space is used between consecutive characters and lines.

Response

[ACK]

Example

\iAS\15\10

This will overwrite the default font spacing to 15 pixels horizontally and to 10 pixels vertically.