Fill Display Area

\i D f word::width word::height

Parameter	Type	Range	Description
width	word	0 ... display width (0 = full width)	horizontal value for the area to be filled
height	word	0 ... display height (0 = full height)	vertical value for the area to be filled

Fills an area of the screen with the active fill pattern (see Set Filling Color, Set Filling Gradient or Set Filling Tile), beginning from the current cursor position.

If the values for width and/or height exceed the right or bottom margin, the controller corrects the values accordingly without sending an error.
If an alpha value other than 255 was set before (see Set Alpha), filling is done with the according opacity.
When filling with a tile graphic, any previously set adjustments for graphics are taken into account (see Set Adjustment for Graphics).

Response:

[ACK]

Example

\iDf\D100\D50

Fills and area of 100x50 pixels starting from the cursor position.

Not supported by: DPC3020, DPC2060, DPC10xx