Copy Screen From

\i M S C byte::screen

Parameter	Type	Range	Description
screen	byte	M, 0 ... number of screens - 1	index of the screen to copy from (M = main screen)

Restores the content of a screen specified by the index screen to the current draw screen.

This command is only available when the main viewport (index 0) of the active draw screen is activated. If another viewport is active, [NACK] is returned.
The currently set inverse mode (see Set Inverse Mode) is ignored (different to Paint Screen From).
If the screen with index screen was never activated as a draw screen before or screen exceeds the available screens, [NACK] is returned.
This command can be used to restore a screen previously copied with Copy Screen To.

Response:

[ACK]

Example

\iMSC\2

Provided the screen with index 2 was activated, its contents is copied to the active draw screen.

Not supported by: DPC3050, DPC3020, DPC2060, DPC10xx