Paint Screen From

\i M S P byte::screen

Parameter	Type	Range	Description
screen	byte	M, 0 ... number of screens - 1	index of the screen to paint from (M = main screen)

Paints the content of a screen specified by the index screen to the current draw screen at the current cursor position.

This command is only available when the main viewport (index 0) of the active draw screen is activated. If another viewport is active, [NACK] is returned.
The currently set inverse mode (see Set Inverse Mode) is taken into account (different to Copy Screen From).
If the screen with index screen was never activated as a draw screen before or screen exceeds the available screens, [NACK] is returned.

Response:

[ACK]

Example

\iMSP\2

Provided the screen with index 2 was activated, its contents is copied to the current cursor position on the active draw screen.

Not supported by: DPC3050, DPC3020, DPC2060, DPC10xx