Enable/Disable Keyboard

\i I K E bool::on_off

Parameter	Type	Range	Description
on_off	bool	0 ... 1	determines whether keyboard is on (1) or off (0)

Enables or disables keyboard scanning.

When keyboard scanning is disabled, reading the keyboard state will return the same result as if no key is pressed (see Get Keyboard State).
Enabling/Disabling the keyboard does not change keyboard reporting (see Enable/Disable Keyboard Reporting), although a disabled keyboard will not report any keys.
The keyboard is enabled by the default. This can be changed on the "Settings" page of iLCD Manager XE. It will be automatically set to default on startup and by the commands Reset All or Reboot Panel Controller.

Response:

[ACK]

Example

\iIKE\0

Disables the keyboard.