Enable/Disable Keyboard Reporting

\i I K R bool::on_off

Parameter	Type	Range	Description
on_off	bool	0 ... 1	determines whether keyboard reporting is on (1) or off (0)

Enables or disables keyboard reporting.

When keyboard reporting is on (on_off = 1), any key pressure and release gets reported (see Key Press/Release) automatically and any running macro is stopped.
When the terminal mode (see Terminal Mode) is on, only the key itself gets reported when the key is pressed (this is what is expected from a standard ANSI terminal).
Switching keyboard reporting off (on_off = 0) avoids stopping macros.
Keyboard reporting is enabled by the default. This can be changed on the "Settings" page of iLCD Manager XE. It will be automatically set to default on startup and by the commands Reset All or Reboot Panel Controller.

Response:

[ACK]

Example

\iIKR\1

Activates keyboard reporting.