Set Row Address

\i C R word::address

Parameter	Type	Range	Description
address	word	0 ... display height - 1	value for an y coordinate

Sets the vertical cursor position (row address).

Using this command changes the y value of the cursor position but not the x value (see Set Cursor Position).
Using values greater than the available rows causes a [NACK] to be sent.
The default value for address is 0. It will be automatically set to default on startup and by the commands Reset All or Reboot Panel Controller.

Response:

[ACK]

Example

\iCR\D50

This example sets the y value of the cursor position to 50. The x value is not affected.