Set Underline Mode

\i A U bool::on_off

Parameter	Type	Range	Description
on_off	bool	0 ... 1	text is outputted underlined (1) or not (0)

Activates or deactivates an underline feature for any subsequent text outputs.

By default the line is drawn at the lowest pixel position, which is within the character area. The vertical position of the underlining can be set via the Set Underline Position command.
The default value for on_off is 0. It will be automatically set to default on startup and by the commands Reset All or Reboot Panel Controller.

Response:

[ACK]

Example

\iAU\1

Causes every subsequent text to be underlined, until the command is repeated and the parameter on_off is set to 0 again.