i.MX93 Series#
This page provides an overview of the processor specifications, for more details please refer to the reference manual published by NXP.
The documentation of our iLCD Linux series can be downloaded as a PDF here:
iLCD Linux Documentation as PDF
System on a Module (SOM)#
Item |
Default |
Additional Options |
|---|---|---|
Processor |
i.MX9352, dual-core 1.7GHz, with NPU |
i.MX9331, single-core 1.7GHz, no NPU |
RAM |
1 GB LPDDR4 (32-bit channel) |
512 MB, 2 GB |
Flash |
16 GB eMMC |
8 GB, 32 GB, 64 GB |
EEPROM |
8 kbit/ 2-wire I²C |
|
External Memory |
Micro SD socket |
|
Real Time Clock |
ultra-low-power AM1805 RTC |
|
Co-processor |
ARM Cortex-M33, 250 MHz |
Connectivity#
Item |
Default |
Additional Options |
|---|---|---|
USB |
USB 3.0 (Type A) host |
USB 2.0 (Type C) device 1) |
Ethernet |
no Ethernet |
10/100/1000 Mbit/s |
WiFi & Bluetooth |
- |
NXP 88W8997 chipset |
Serial |
UART |
Processor Maximum Ratings#
Item |
Symbol |
Minimum |
Maximum |
Unit |
|---|---|---|---|---|
Supply Voltage |
VCC |
-0.3 |
5.5 |
V |
Input Voltage |
VIN |
-0.3 |
3.3 |
V |
Operating Temperature 2) |
TOPR |
02) |
70 |
°C |
Storage Temperature |
TSTR |
-40 |
85 |
°C |
Humidity 3) |
10 |
90 |
%RH |
Notes:
1) See [USB-C Port (USB-C)] for instructions on using USB-C as device
2) Optional: -20°C
3) Temp. ≤ 60°C, 90% RH MAX.
Note
The ground connection to the display should be as stable as possible. Especially for iLCDs with projected capacitive touch panel the ground connection to the display and the power supply is crucial for an error-free function. If it is not possible or not wanted to connect the power supply with protective earth, this shall be done via a 20 nF capacitor.